Spare and Wear Parts VacuMaster Eco
- Wide range of spare and wear parts
- Suction plates, measuring devices
Vacuum Lifting Devices VacuMaster Eco
Horizontal handling of smooth and airtight workpieces
Horizontal handling of smooth and airtight workpieces up to 1,000 kg
Ergonomic and damage-free handling of large loads by only one operator
Excellent work safety and process reliability thanks to vacuum reservoir and audible warning device
Independence from a energy source allows for flexible use at multiple locations or mobile use
Low operating costs thanks to operation without external energy source
Handling systems for the Chinese market
The product area of handling systems is covered in China by our experienced partner Binar Handling. With this cooperation, we ensure that our high standards for quality, efficiency and service are also met in China.
If you require support or further information, please feel free to contact Binar Handling directly.
Design
Design
- Basic module (1) with lifting cylinder for vacuum generation without an external energy source
- Ergonomic operator handle (2) for controlling the lifting device
- Configurable and adjustable beam system consisting of one aluminum main beam (3) and several steel cross beams (4)
- Suction plate holders (5) and suction plates (6) adapted to the workpiece
- Separate operator handle (7) for lifting and lowering the load with a connected hoist, e.g. a chain hoist (not included in delivery)
Technical Data
Technical Data
.jpg)
| Type | Max. lift capacity* [kg] | Min. workpiece format [mm] | Max. workpiece format [mm] | Number of suction plates |
|---|---|---|---|---|
| Eco 75 | 75 | 220 x 220 | 1,000 x 1,000 | 1 |
| Eco 250 | 250 | 360 x 360 | 3,000 x 2,000 | 1, 2, 4, 6, 8 |
| Eco 500 | 500 | 480 x 480 | 4,000 x 2,000 | 1, 2, 4, 6, 8 |
| Eco 750 | 750 | 900 x 620 | 4.000 x 2.000 | 4, 6, 8 |
| Eco 1000 | 1,000 | 630 x 630 | 4,000 x 2,000 | 1, 4, 8 |
* The recommended minimum workpiece weight is 10 % of the lift capacity.
| Type | Length L [mm] | Width B [mm] | Overall height H [mm] | Operator handle L1 [mm] | Weight [kg] |
|---|---|---|---|---|---|
| Eco 75 | 210 | 210 | 368 - 382 | - | 8 |
| Eco 250 | 800 - 2,400 | 400 - 1,500 | 450 - 825 | 400 - 1,100 | 33 - 59 |
| Eco 500 | 800 - 3,200 | 400 - 1,500 | 605 - 1,130 | 500 - 1,200 | 93 - 141 |
| Eco 750 | 800 - 3,200 | 400 - 1,500 | 735 - 1,130 | 500 - 1,200 | 132 - 141 |
| Eco 1000 | 800 - 4,000 | 1,150 | 730 - 1,210 | 500 - 1,200 | 138 - 309 |
Product Inquiry
Handling systems for the Chinese market
The product area of handling systems is covered in China by our experienced partner Binar Handling. With this cooperation, we ensure that our high standards for quality, efficiency and service are also met in China.
If you require support or further information, please feel free to contact Binar Handling directly.
Spare parts
Accessories
Vacuum Gripper Shut-Off
Adapts to changing workpieces
With the vacuum gripper shut-off valve several vacuum grippers can be turned off for handling of cut pieces or pieces with gaps.
Parking Stands
Secure storage of the lifting device
When the lifting device is not in use, the parking stands allow it to be stored securely while protecting the suction plates. This allows the crane to be used for other purposes.
Product recommendations
Aluminum Bridge Cranes
- Modular crane system for flexible and cost-effective assembly of individual crane solutions
- Installation on ceiling or portal construction
- Particularly suitable for large workspaces
- Lift capacity up to 1,200 kg
Wall-Mounted Jib Cranes
- Mounted using a wall bracket or clasp bracket
- Lift capacity up to 1,000 kg
Chain Hoists
- Sturdy chain hoist with limit switch
- Lift capacity up to 2,500 kg
- Standard lifting height of 3,000 mm
- CSA certified for USA and Canada
Column-Mounted Jib Cranes
- Fitted with anchors for floor mounting
- Lift capacity up to 1,000 kg
- Optionally with mobile base plate (lift capacity up to 200 kg)