.jpg)
Clasp bracket
- For mounting the wall bracket to an existing production hall pillar or column
Wall-Mounted Jib Cranes
Jib cranes from Schmalz are very versatile and can be combined with many lifting devices such as chain hoists, rope hoists, rope balancers or vacuum lifting devices. The jib crane is attached to an existing column or wall and has a pivoting angle of 180°. This enables the optimum use of existing hall dimensions. Schmalz offers various solutions for attaching the crane according to the customer's local conditions. Special, newly developed, wall consoles for attachment of the wall-mounted jib crane permit easy installation.
For a weight of up to 1,000 kg, the crane systems use aluminium crane rails. This guarantees extreme responsiveness and supports ergonomic and fatigue-free working. All crane columns are anchor-ready, no additional intermediary plates are necessary.
Optimum ergonomics thanks to excellent low-friction properties
High working speed and positioning accuracy
Ideal utilization of existing hall conditions
High-quality, low-wear components with anodized profile surface
Designed according to DIN EN 13001: Lifting class HC3, stress group S1
Handling systems for the Chinese market
The product area of handling systems is covered in China by our experienced partner Binar Handling. With this cooperation, we ensure that our high standards for quality, efficiency and service are also met in China.
If you require support or further information, please feel free to contact Binar Handling directly.
Modular system
Modular system
.jpg)
(1) Chain hoist
(2) Energy supply
Trailing cable or conductor line
(3) Wall bracket painted steel
For adaptation to fastening elements
(4) Aluminum pivot bearing
Column mounted jib crane swivel angle: 270°
Wall mounted jib crane swivel angle: 180°
Can be limited
(5) Aluminum jib
Length: 2,000 mm to 8,000 mm
Modular elements
Modular elements
Aluminum jib minimizes the force required
- Optimal low friction operation thanks to extruded section with hollow chamber geometry
- Material: Aluminum natural anodized (EN AW 60 63 T66)
- Easy swiveling thanks to low mass (weight from 3 kg/m)
- Easy jib alignment for exact positioning of the load
- In each case, two fixed and variable end stops for adjusting the travel path are included
.jpg)
Easy to move pivot bearing
- Effortless swiveling even close to the pivot bearing
- Easy mounting even when the ceiling height is low thanks to two separate bearing bolts
- Maintenance free spherical bearing
Low friction transport trolley
- Sturdy pressure cast aluminum design
- Secure connection of all types of hoists
- Optimal running performance thanks to large rollers made from high performance plastic
.jpg)
Trailing cable
- Standard energy supply via cable trolley in the aluminum section
- Suitable for power cables (flat cables) and hoses (vacuum and compressed air)
.jpg)
Conductor line
- Wireless power supply via insulated plastic rails
- There are no cable storage devices or cable loops to cause interference
- Travel path between pivot bearing and transport trolley up to 400 mm larger
Technical Data
Technical Data
.jpg)
- Basis for calculation: DIN EN 13001
- Hoisting class: HC3
- Stress group: S1
Wall-mounted jib cranes especially for vacuum lifting device VacuMaster
Wall-mounted jib crane WK with aluminium crane rails for vacuum lifting device VacuMaster
| Type | Max. lift capacity [kg] | L [mm] | H* [mm] | H1 [mm] | B [mm] | L1 [mm] | L2 [mm] |
| WK-KZG-80 | 80 | 3,000 - 6,000 | 695 | 500 | 205 | 155 | 650 - 850 |
| WK-KZG-125 | 125 | 3,000 - 6,000 | 695 - 945 | 500 - 750 | 205 | 155 | 650 - 850 |
| WK-KZG-200 | 200 | 3,000 - 8,000 | 945 | 750 | 250 | 155 | 700 - 900 |
| WK-KZG-350 | 350 | 3,000 - 6,000 | 945 | 750 | 250 | 155 | 700 - 900 |
| WK-KZG-650 | 650 | 3,000 - 6,000 | 1,195 | 1,000 | 400 | 155 | 750 - 950 |
| WK-KZG-1000 | 1,000 | 3,000 - 6,000 | 1,495 | 1,300 | 600 | 155 | 800 - 1,000 |
*H max. = 5,000 mm
Wall-mounted jib cranes especially for vacuum tube lifter Jumbo
Wall-mounted jib crane WK with aluminium crane rails for vacuum tube lifter Jumbo
| Type | Max. lift capacity [kg] |
L [mm] | H* [mm] | H1 [mm] | B [mm] | L1 [mm] | L2 [mm] |
| WK-JU-45 | 45 | 2,000 - 6,000 | 695 | 500 - 505 | 205 | 155 | 450 - 750 |
| WK-JU-65 | 65 | 2,000 - 6,000 | 695 | 500 | 205 | 155 | 450 - 750 |
| WK-JU-85 | 85 | 3,000 - 6,000 | 695 | 500 | 205 | 155 | 650 - 850 |
| WK-JU-110 | 110 | 3,000 - 6,000 | 695 | 500 | 205 | 155 | 650 - 850 |
| WK-JU-140 | 140 | 3,000 - 6,000 | 695 - 945 | 500 - 750 | 205 - 250 | 155 | 650 - 850 |
| WK-JU-200 | 200 | 3,000 - 6,000 | 945 | 750 | 250 | 155 | 700 - 900 |
| WK-JU-300 | 300 | 3,000 - 6,000 | 945 | 750 | 250 | 155 | 700 - 900 |
*H max for type WK…45-140 = 4,500 mm (4,750 mm for type WK…200/300)
Product Inquiry
Accessories
.jpg)
Anchor set
- High quality injection mortar anchor for attachment to walls (wall thickness min. 250 mm)
- For loads weighing up to 110 kg (depending on the jib length)
Counter plate
- Counter plate with clearance holes for attachment to walls
Slewing angle limiter
- Limit stop for individual adjustment of the swiveling range
- The limit for each swivel side is 0° to 100°
Blower console
- For attaching vacuum generators directly to the crane column
- Easy mounting by means of a clasp
Integrated motor protection switch
- To protect electrical devices against overvoltage
- Can be locked, optional and therefore suitable as main switch
Drag chain V-Chain
- Packs the vacuum supply hose package
- Saves additional space with low room heights
Product recommendations
Vacuum Tube Lifters
- Move workpieces up to 300 kg quickly and easily
- Configurable lifting unit, operator handle, vacuum gripper and vacuum generator
- Lifting and lowering the load using vacuum
Vacuum Lifting Devices
- Move heavy loads up to several tons ergonomically and securely
- Basic module, operating unit, load beams and suction plates configurable
- Lifting and lowering the load using a chain hoist