Part no.: 10.01.22.07828
| Attribute | Value |
|---|---|
| B | 350 mm |
| B1 | 316 mm |
| d1 | 31.5 mm |
| d2 | 40 mm |
| d3 | 50 mm |
| d4 | 63 mm |
| d5 | 64 mm |
| d6 | 80 mm |
| H | 82.9 mm |
| H1 | 195.7 mm |
| H2 | 47.2 mm |
| H3 | 118.4 mm |
| L | 450 mm |
| L1 | 448 mm |
| Z (Stroke) | 20 mm |
| Attribute | Value |
|---|---|
| Shape | Rigid |
| Arrangement suction cells | Triangle, 45 mm |
| Version | Round edge |
| Nozzle diameter | 1.2 mm |
| Suction rate (max.) | 870 l/min |
| Air consumption suction | 395 l/min |
| Design vacuum generator | 1 ejector block, integrated valve |
| Measuring range [bar] | -1,0 ... 0,0 bar |
| Construction vacuum switch | with display |
| Electrical connection | Male connect M8, 4 pole |
| Indication | 2xLED |
| Protection type IP | IP 65 |
| Size | 40 |
| Suction cup material | Silicone SI |
| Material hardness [Shore A] | 55 (Shore A) |
| Number of folds | 2.5 |
| Shape | Push In |
| Length L | 15.5 (mm) |
| Outside diameter D | 7.3 (mm) |
| Measuring range [bar] | bar |
| Material | Polyoxymethylene |
| Nominal size | 120 |
| Shape | Push In |
| Length L | 153.5 (mm) |
| Width B | 97.8 (mm) |
| Height H | 72 (mm) |
| Size | 100 |
| Measuring range [bar] | bar |
| Shape | High flow |
| Connection | Adapter plate 1 |
| Thread G1 | G3/8"-F |
| Thread G2 | G1"-F |
| Control valve | Normally open |
| Electrical connection | Male connect M12, 5 pol |
| Construction vacuum switch | PNP switching |
| Weight | 1.25 (kg) |
| Length L | 153 (mm) |
| Width B | 71 (mm) |
| Height H | 33.8 (mm) |
| Measuring range [bar] | bar |
| Utilization design | Lightweight layer gripper |