Schmalz

Vacuum Tube Lifters JumboFlex Generation 1

One-hand operation for workpieces weighing up to 50 kg

The vacuum tube lifter JumboFlex allows you to move lighter goods up to 50 kg ergonomically and with high cycle rates. The control handle fits comfortably in the hand and allows the operator to work for a long period of time without fatigue. With simple one-finger control, lifting, lowering and releasing the load is extremely intuitive. The JumboFlex’ wide range of features allows it to tackle virtually any task. It comes standard with a quick-change system for replacing the vacuum grippers. Workpieces which are gripped from the vertical side automatically swing back into the horizontal position where they can be continuously rotated.

Product Inquiry

Innovative one-hand operation for fast and reliable movement sequences

Ergonomic control handle adapted for right and left handed users

Fatigue-free, back-friendly lifting ensures consistent performance

Central one-finger control for lifting, lowering and releasing the load

Universally applicable with standard quick-change system for exchanging the extensive range of grippers

Does a handling system from Schmalz pay off? Find out in just a few clicks!

Would you like to know if investing in a handling system really pays off for you? Our free online amortization calculator will give you a clear answer in no time – fast, simple and completely non-binding. A few clicks are all it takes and you will instantly see when your investment will bring the desired economic success.
Start now – and discover new ways to increase efficiency and reduce costs!

Directly to the amortization calculation
Modular system

(1) Lifting unit with protective tube

(2) Suspension height can be adjusted without a load attached

(3) Filter, changeable without tools

(4) One-finger control for lifting, lowering and releasing the load

(5) Ergonomic control handle with non-slip elements

(6) Continuous rotation, can be locked in 90° increments

(7) Quick-change adapter for fast, tool-free gripper change

(8) Vacuum grippers, adapted to the workpiece

(9) 90° slewing mechanism (manual) for picking up loads from the side

(10) Radio remote control SRC for vacuum generator (optional)

 

The operating unit of the JumboFlex 50 for maximum loads of up to 50 kg is different than the operating unit of the JumboFlex for maximum loads of up to 20 and 35 kg.

Modular elements
Technical Data

The vacuum tube lifter JumboFlex can be configured specifically based on the requirements of each individual application due to its modular design. The technical data varies depending on the configuration and on the vacuum gripper chosen.

The following technical data are standard values.

Type Max. lift capacity [kg] Workpiece format* min.
[mm]
Workpiece format* max.
[mm]
Max. lifting speed [m/min] Max. lifting stroke Z
[mm]
Height H** with vacuum pump [mm] Height H** with vacuum ejector
[mm]
Lift tube Ø D
[mm]
Flex 20 20 200x200 2,000x1,000 60 1,500 2,500 2,680 80
  20 200x200 2,000x1,000 60 1,800 2,800 2,980 80
Flex 35 35 200x200 2,000x1,000 60 1,500 2,500 2,680 100
  35 200x200 2,000x1,000 60 1,800 2,800 2,980 100
Flex 50 50 200x200 2,000x1,000 60 1,500 2,500 - 120
  50 200x200 2,000x1,000 60 1,800 2,800 - 120

*Depends on the vacuum gripper chosen
**Vacuum grippers not included (total height = H + height of the vacuum gripper)

Example configurations

JumboFlex Weight-Control

With the integrated weighing device, loads can be lifted and weighed in a single movement.

JumboFlex Safety+

Two-hand release for extra safety. Adjustable, reduced lowering speed, e.g. for sensitive components or for disabled users.

JumboFlex Easy-Release

Reduced residual vacuum for easy release. The load is released using an additional release lever and only when fully lowered, e.g. with quadruple grippers or grippers with bellows suction cups.

JumboFlex Quick-Release

Allows loads to be deliberately ejected during lifting by means of an additional ejection lever. For use in baggage handling at airports or similar applications.

JumboFlex Air

The compressed air connection on the gripper connection allows individually designed grippers to be controlled pneumatically via the actuating lever.

JumboFlex Battery

Gripper and tube lifter as a complete unit for handling starter batteries in the automotive industry. The complete system can be used to handle different cover shapes, sizes and loads up to 27 kg.

Product Inquiry

Time to Flex*: The Vacuum Tube Lifter JumboFlex now with new functions.

The Vacuum Tube Lifter JumboFlex has a new design and is now even more simpler, more efficient and more ergonomic. Find out more about the highlights and take a look at the details in the live introduction.

 

* For all those who need more explanation: flexing means really showing what you can do.

Learn more!

Spare parts

Accessories

Product recommendations

Schmalz Companies

Select your Schmalz Company in one of the following regions:

Regions

Your region is not listed?

Schmalz maintains an international sales network with sales partners in over 80 countries. Please select a language for our international website.

The URL you are trying to access is not in the correct language or country context.

The store channel associated with your account does not match the channel of the requested URL. To view prices or place an order, please switch to your user-specific channel.

0 products successfully added to cart

Go to shopping cart