Part no.: 10.02.03.00379
| Attribute | Value |
|---|---|
| B | 75 mm |
| B1 | 246 mm |
| D | 75.5 mm |
| D1 | 86.2 mm |
| H | 68 mm |
| H1 | 92.5 mm |
| H2 | 25 mm |
| H3 | 12 mm |
| L | 107.5 mm |
| L2 | 70 mm |
| X2 | 110 mm |
| X3 | 210 mm |
| Attribute | Value |
|---|---|
| Additional function area gripper | PXR (I-shape) |
| Voltage DC | 24 V - DC |
| Suction rate (max.) | 52.5 l/min |
| Max. vacuum | 850 mbar |
| Control valve | Normally open |
| Rated power | 3 W |
| Voltage | 24V - DC |
| Rated current | 0.1 A |
| Pressure range (operating pressure) [bar] | 3.00 ... 7.00 bar |
| Operating temperature | 0 ... 50 °C |
The matching software for this product is available in this section.
| Documentation | Language |
|---|---|
| English |
| Utilization design | Pneumatic vacuum generator RECB |
| Operating temperature | °C |
| Pressure range (operating pressure) [bar] | bar |
| contains | Silencer |
| and | Screws |
| Utilization design | Ejector module |
| Size | 13 |
| contains | 6x flap |
| Suction rate (max.) | 65.8 (l/min) |
| Operating temperature | 0 ... 60 °C |
| Shape | High vacuum |
| Number of stages | 2 |
| Hole diameter | 13 (mm) |
| Shape compact ejectors | S |
| Degree of evacuation | 85 (%) |
| Pressure range (operating pressure) [bar] | 2.0 ... 6.0 bar |
| Optimal operating pressure | 4 (bar) |
| Size | 30 |
| Suction cup material | Elastodur ED |
| Material hardness [Shore A] | 65 (Shore A) |
| Thread G1 | G1/4"-M |
| Number of folds | 1.5 |
| Voltage DC | 24 V - DC |
| Pressure range (operating pressure) [bar] | -0.9 ... 8.0 bar |
| Control valve | Normally closed |
| Nominal size | 5 (mm) |
| Nominal flow rate | 3 (m³/h) |
| Type | RECB |
| Length L | 150 (mm) |
| Width B | 110 (mm) |
| Height H | 22 (mm) |
| Version | Quick-change system MATCH |
| Utilization design | Pneumatic vacuum generators RECBi |
| Length L | 66.7 (mm) |
| Width B | 24.4 (mm) |
| Height H | 24.5 (mm) |