More gentle on the workpiece than conventional clamping systems thanks to soft friction and sealing materials
Integrated vacuum generation in version VC-M makes additional vacuum pump unnecessary
Flexible 5-sided machining, as Multi-Base can be rotated continuously (360°) and swivelled (90°)
Cost-effective stand-alone clamping solution, as the Multi-Clamp suction plate can also be used individually
The matching documentation for this product is available in this section.
| Documents | Language |
|---|---|
| English |
1 - 10 from 10 results
Part no.: 10.01.12.01845
Vacuum clamping system Multi-Clamp with integratet vacuum generation
| Length L | 165 (mm) |
| Width B | 165 (mm) |
| Height H | 220.5 (mm) |
| Air consumption [l/min] | 48 (l/min) |
| Air consumption | 2.88 (m³/h) |
| Suction rate | 2.3 (m³/h) |
Part no.: 10.01.12.01852
Vacuum clamping system Multi-Clamp for operation with a vacuum pump
| Length L | 265 (mm) |
| Width B | 170 (mm) |
| Height H | 220.5 (mm) |
| Suction rate | 3 (m³/h) |
| Length L | 170 (mm) |
| Width B | 165 (mm) |
| Height H | 209 (mm) |
| Length L | 200 (mm) |
| Width B | 55 (mm) |
| Air consumption [l/min] | 48 (l/min) |
| Air consumption | 2.88 (m³/h) |
| Suction rate | 2.3 (m³/h) |
| Outside diameter D | 210 (mm) |
| Air consumption [l/min] | 48 (l/min) |
| Air consumption | 2.88 (m³/h) |
| Suction rate | 2.3 (m³/h) |
Part no.: 10.01.12.02052
Multi-Clamp - Suction plate with integrated vacuum generation
| Length L | 300 (mm) |
| Width B | 100 (mm) |
| Air consumption [l/min] | 48 (l/min) |
| Air consumption | 2.88 (m³/h) |
| Suction rate | 2.3 (m³/h) |
| Length L | 265 (mm) |
| Width B | 170 (mm) |
| Height H | 209 (mm) |
| Length L | 200 (mm) |
| Width B | 55 (mm) |
| Outside diameter D | 210 (mm) |
| Length L | 300 (mm) |
| Width B | 100 (mm) |
