.jpg)
Clamp bracket
- For mounting the wall bracket to an existing hall column or support
Special Cranes
Different types for the optimal use of your space
The modularization of our crane types enables us to supply the right crane for different requirements. Our modular jib cranes are either used with a wall bracket as a wall-mounted jib crane or positioned in the room with a custom-built column.
Schmalz offers solutions for particularly low room heights, bypassing interfering contours or plunging into hard-to-reach work areas. Schmalz also offers solutions for ATEX areas.
Modular configuration according to customer requirements
Rapid handling of customer inquiries through the addition of special cranes to the standard portfolio
Optimal design of the system for the load capacity due to variable column and column allocation
Optimal ergonomics thanks to excellent smooth running properties
High working speed and positioning accuracy
Handling systems for the Chinese market
The product area of handling systems is covered in China by our experienced partner Binar Handling. With this cooperation, we ensure that our high standards for quality, efficiency and service are also met in China.
If you require support or further information, please feel free to contact Binar Handling directly.
Design
Design
- Flat jib (1) for particularly low room heights
- Articulated-arm jib (2) for bypassing interfering contours
- Telescopic boom (3) for hard-to-reach work areas
- ATEX jib crane (4) for hazardous areas
Modular elements
Modular elements
.jpg)
Smooth running swivel bearing
- Effortless swiveling even close to the swivel bearing
- Easy mounting even at low room height due to two separate bearing bolts
- Maintenance-free spherical plain bearing
Easy running transport trolley
- Sturdy die-cast aluminum construction for use in flat jibs and telescopic jibs
- Safe connection of all types of lifting equipment
- Optimal running behavior due to large rollers made of high-performance plastic
.jpg)
Drag line (except for articulated-arm jib)
- Standard energy supply via cable trolley
- Suitable for power cables (flat cables) and hoses (vacuum and compressed air)
.jpg)
Crane column
- High-quality welded steel construction, painted in RAL 7035 light gray (special painting on request)
- Ready to dowel
- Space-saving dimensions of the base plate (400 mm x 400 mm to 950 mm x 950 mm)
Wall bracket
- High-quality welded steel construction, painted in RAL 7035 light gray (special painting on request).
- For connection with dowels, a clasping bracket or counter plate mounting to existing walls and columns
Technical Data
Technical Data
- Use as wall or column-mounted jib crane
- Optimally designed for a vacuum tube lifter Jumbo
Example configurations
Example configurations
Flat jib for particularly low ceilings
- Reduction in the overall height due to flat jib
- Modular jib length up to 5,000 mm
- For loads weighing up to 110 kg
- Base plate 400 x 400 mm
- Lower edge of jib up to 4,000 mm
Articulated-arm jib to move around obstacles
- Easy circumvention of obstacles such as pillars in production halls or machines thanks to the jib with additional joint
- Large usable ceiling height and avoidance of interference contours thanks to integrated vacuum line
- For loads weighing up to 85 kg
- Jib length of 3,000 mm and 4,000 mm
- Base plate 400 x 400 mm
- Lower edge of jib from 2,900 mm to 4,000 mm
Telescopic jib for confined working areas
- Jib lengths of 3,000 mm, 4,000 mm and 5,000 mm
- For loads weighing up to 85 kg
- Base plate 400 x 400 mm
- Lower edge of jib from 3,000 mm to 4,000 mm
.jpg)
ATEX jib crane for potentially explosive atmospheres
- Suitable for explosion protection zones 1/2 and 21/22 in the chemical and pharmaceutical industry as well as in the food and beverage industry
- Crane rails made of steel
- Also available together with a flat jib or articulated arm jib
- For loads weighing up to 140 kg
Product Inquiry
Accessories
.jpg)
Dowel set
- High-quality injection mortar dowels for fastening to walls (wall thickness min. 200 mm)
- For lift capacities up to 110 kg (depending on cantilever length)
Counter plate
- Counter plate with through holes for attachment to walls
Slewing angle limiter
- Stop for individual adjustment of the swivel range
- Limitation per swing side is 0° to 100°
Blower control
- For mounting vacuum generators directly to the crane column
- Simple mounting by means of clasp
Drag chain V-Chain
- Wraps the vacuum feeder hose assembly
- Saves additional space at low room heights
- Optimal complement for a flat boom
Anchor bolts
- Use with low quality concrete
- Foundation dimensions from 1,300 mm x 1,300 mm to 2,300 mm x 2,300 mm
Mobile base plate
- No fastening to the ground required
- Easily transportable by forklift or pallet truck
- Dimensions range from 1,200 mm x 1,200 mm to 1,470 mm x 1,470 mm
Product recommendations
Vacuum Tube Lifters
- Move workpieces up to 300 kg quickly and easily
- Configurable lifting unit, operator handle, vacuum gripper and vacuum generator
- Lifting and lowering the load using vacuum